USER’S GUIDE SIL2030 SERIES BATHROOM FAN HEATER REPLACEMENT COMPONENT LIST INCLUDED This unit complies with the CSA and UL standards For further information or to consult this guide online, please visit our website at www.stelpro.
WARNING Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product. This product must be installed by a qualified person and connected by a certified electrician, according to the electrical and building codes effective in your region.
SPECIFICATIONS BathRoom Fan heateR VOLTS 240 V WATTS 1000/2000 W WEIGHT 12.1 LB / 4.9 kG DEPTH 4” / 101 MM WIDTH 13 3/8” / 340 MM HEIGHT 17 3/8” / 441 MM TECHNICAL DRAWINGS 13 3/8" 340mm kO O 7/8" 22mm 17 3/8" 441mm 15 7/8" 403mm kO 1 1/16" 27mm 5 5/8" 143mm 1" 25mm O 7/8" 22mm 1 1/16" 26mm 11 1/4" 286mm 1 1/2" 38mm BOTTOM kO 8" 203mm 6 11/16" 170mm O 7/8" 22mm 1 3/16" 31mm FRONT 1" 25mm 3 15/16" 101mm SIDE INSTALLATION 9 1/8˝ [232 mm] n.B.
OPERATION thermostat features · Maintains a stable room temperature. · Highest setting offers continuous operation of heater. · Thermostat settings correspond to desired room temperatures and ensure the cycling of the heater. · Thermostat will not engage the heater to operate when the room temperature is higher than the thermostat setting. · Thermostat will engage heater to operate continuously when the room temperature is lower than the thermostat setting.
TROUBLESHOOTING pRoBlem deFectiVe paRt oR paRt to checK The unit does not work • • • • The unit runs continuously • Defective thermostat/timer or wrong thermostat/timer setting • Heat losses higher than the unit capacity The enclosure is extremely hot • Defective thermal protection • Blocked air vents • Defective motor The unit cycles under control of the thermal protection (overheat indicator) • Blocked air vents • Defective motor Overheating • Defective thermostat/timer or wrong thermostat/time
LIMITED WARRANTY This limited warranty is offered by Stelpro Design inc. (“Stelpro”) and applies to the following product made by Stelpro: model SIL2030. please read this limited warranty carefully. subject to the terms of this warranty, Stelpro warrants its products and their components against defects in workmanship and/or materials for the following periods from the date of purchase: 5 years. This warranty applies only to the original purchaser; it is non-transferable and cannot be extended.
