USER’S GUIDE ACW750 SERIES ARCHITECTURAL CABINET REPLACEMENT COMPONENT LIST INCLUDED This unit complies with CSA and UL standards For further information or to consult this guide online, please visit our website at www.stelpro.
IMPORTANT INSTRUCTIONS WARNING Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.
SPECIFICATIONS, TECHNICAL DRAWINGS & INSTALLATION SPECIFICATIONS 750 W DENSITY PER LINEAR FOOT 600 W DENSITY PER LINEAR FOOT 450 W DENSITY PER LINEAR FOOT VOLTS MM IN. KG --- 1500 W ACW750612X 1200 W ACW750609X 900 W X 600 23 5/8 12.7 28 --- 2250 W ACW750918X 1800 W ACW750913X 1350 W X 900 35 7/16 17.7 39 LB --- 3000 W ACW7501224X 2400 W ACW7501218X 1800 W X 1200 47 1/4 24.1 53 ACW7501537X 3750 W ACW7501530X 3000 W ACW7501522X 2250 W X 1500 59 1/16 29.
OPERATION & TROUBLESHOOTING ELECTRICAL DIAGRAM L1 L2 L1 L2/N Disconnect switch (optional) Thermostat double pole (optional) Disconnect switch (optional) Thermostat single pole (optional) L1 Relay (optional) Thermal protection Element Thermal protection Element Thermal protection Element L2/N OPERATION Warning: the heater must be properly installed before it is used.
REPLACEMENT COMPONENT LIST REPLACEMENT COMPONENT LIST REF.
MAINTENANCE MAINTENANCE CAUTION – High temperature; risk of fire. Keep electrical cords, drapery, furnishings, and other combustibles at least 3 feet (0.9 m) from the front of the heater and away from the side and rear. All other repairs and maintenance other than those described in this guide should be performed by qualified service personnel. In order for the warranty to be valid, the unit must be cleaned regularly.
