Owners manual

If you want to shorten the scanning time and get improved scanning results then you may instruct the
software to look for only one particular file type so that the software searches only for that particular
file (for example : jpg) and provides you better results. Kindly follow the instructions below to perform
selective scanning.
1. Run Stellar Phoenix Photo Recovery software and click on Recover Photo, Audio & Video
button.
2. Select the media or the memory card from the list. You can select specific region and/or
specific file types for the scanning process by clicking on Advanced Settings button.
3. Click on the Scan Now button to continue. The software will only scan for the selected JPG
files now.
6. Does my card need to be connected to the system till the time of the recovery?
Yes. It is very important that you do not remove your media during the scan or recovery. Media
should only be detached once the recovery process is completed.
7. Can I save my recovered data on the same drive?
No. The data cannot be saved on the same drive as it will lead to overwriting of data which in turn will
result in permanent data loss.
8. Can I create the image of the drive on the same drive (from which I want to recover the data)?
No. Image of the drive needs to be saved at another location as saving the image file on the same
media will lead to overwriting and permanent data loss.
9. I have completed my scan. How can I recover the data using the software?
Please follow the underlying steps for recovery of the data.
1. Run Stellar Phoenix Photo Recovery.
2. Click on Resume Recovery.
3. Browse to the saved scan information file.
4. Click Continue button to proceed.
5. The software will list the files as previously scanned.
6. Select the files you would like to recover and click on Recover button.
7. Provide the destination to save the files.
10. How to recover photo, audio and video using the software?
Kindly follow the underlying steps:
1. Connect your storage media to your computer and run Stellar Phoenix Photo Recovery
software and click on Recover Photo, Audio & Video button.
2. Select the media or the memory card from the list.
3. Click on the Scan Now button.
4. Now the software will scan the media and show you a preview of the files that can be
successfully recovered.
5. Select the files which you want to recover and click on Recover button to save the file on a
different hard-drive.
11. How to perform the recovery at the later stage after performing the scan?