Owners manual

Resume Recovery
Resume Recovery feature is used to start recovery procedure from a saved scan information or an
image file. You can use this option to resume your recovery process. To resume recovery you require
previously stored information having recovery status or a previously stored image of drive / volume.
Users can resume recovery through following options:
 Image(s)
 Saved Scan Information
To resume recovery:
1. Click Resume Recovery button on the main user Interface. Stellar Phoenix Photo Recovery
window opens. This window contains list of saved scan information and image file existing in the
system.
2. Select Image(s) tab and click on desired file from the list and click Scan button.
3. Select Recover button to start the recovery process.
4. Select Saved Scan Information tab and click on desired file from the list and click Scan button.
5. Click Recover button and specify location where recovered files / folders have to be saved.
Files / folders are recovered at the specified location.
Note: To add image / saved scan in the list, click Add Files button. To remove image /
saved scan from the list, select image file / saved scan and click Remove Files button.
To refresh image / saved scan from the list, select image file / saved scan and click Reset
button.