assembly Instructions

– 14 –
– 15 –
XLEDHome 2 XLEDHome 2 XL
Dimensions (H x W x D)
194 x 180 x 161 212 x 180 x 161
Output
14.8 W / 80 lm/W 20 W / 80 lm/W
Luminous flux / brightness
1184 lm 1608 lm
Weight
0.575 kg 0.620 kg
Area illuminated
Front view 283.1 cm
2
Side view 113 cm
2
Front view 316.2 cm
2
Side view 115 cm
2
Additional switching capacity
max. 800 W (resistive load, e.g. light bulbs)
max. 400 W (uncorrected, inductive, cos ϕ = 0.5,
e.g. fluorescent lamps)
max. 400 W (electronic ballasts, capacitive, e.g. low-energy bulbs,
max. 4 each, ≤ 88 μF))
Eciency
80 lm/W
Colour temperature
4000 K (neutral white)
Colour rendering index
Ra ≥ 80
Supply voltage
230-240 ~V / 50/60 Hz
Sensor system
Passive infrared
Reach
max. 14 m
Angle of coverage
140°
Time setting
8 s - 35 min
Twilight setting
2 - 2000 lux
IP / protection class
IP44 / II
9� Warranty
This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is
5 years and starts on the date of sale to the con-
sumer. We will remedy defects caused by material
flaws or manufacturing faults. The warranty will be
met by repair or replacement of defective parts at
our own discretion. The warranty shall not cover
damage to wear parts, damage or defects caused
by improper treatment or maintenance. Further
consequential damage to other objects shall be
excluded. Claims under the warranty will only be
accepted if the unit is sent fully assembled and
well-packed with a brief description of the fault, a
receipt or invoice (date of purchase and dealer's
stamp) to the appropriate Service Centre.
Service:
Our Customer Service Department will repair faults
not covered by warranty or after the warranty pe-
riod. Please send the product well-packed to your
nearest Service Centre.
10� Technical specifications
Malfunction Cause Remedy
Sensor-switched LED floodlight
without power
n Fuse faulty, not switched ON,
break in wiring
n Short circuit
n Replace fuse, turn ON mains
switch, check lead with voltage
tester
n Check connections
Sensor-switched LED floodlight
will not switch ON
n Twilight setting in night mode
during daytime operation
n Mains power switch OFF
n Fuse faulty
n Detection zone not properly
targeted
n Readjust
n Switch ON
n Fit new fuse, check connec-
tion if necessary
n Readjust
Sensor-switched LED floodlight
will not switch OFF
n Continuous movement in the
detection zone
n Check zone and readjust if
necessary or apply shroud
Sensor-switched LED floodlight
keeps switching ON and OFF
n Animals moving in the detec-
tion zone
n Tilt sensor higher or apply
specific shrouds; adjust
detection zone or fit shrouds
Sensor-switched LED floodlight
switches ON when it should not
n Wind is moving trees and
bushes in the detection zone
n Cars on the road are being
detected
n Sudden change in tempera-
ture caused by weather (wind,
rain, snow) or air discharged
from fans, open windows
n Sensor-switched LED flood-
light swaying (moving),
resulting, for example, from
gusts of wind or heavy
precipitation
n Change detection zone
n Change detection zone
n Change detection zone,
mount in a dierent place
n Fit sensor-switched LED flood-
light to a firm surface
11� Troubleshooting
GB