Owner manual

Usage considerations Continued
• Considertheinteractionbetween
variousOEMcomponentssuchas
ballastandlamptypes.Allcomponents
shouldbetestedforcomplete
compatibilityasasystem.
• TheHFLUM2-WRisaUL/CUL
Listedopentypedevicethatrequires
installationinaxtureorlistedjunction
boxorenclosure.
• Whenuseinindoorlocationswherethe
temperaturemaybelessthanactual
roomconditions,suchasunheated
warehousesorgaragestheHFLUM2-
WRistobetotallyenclosed.
• Theantennausedforthistransmitter
mustbeinstalledtoprovidea
separationdistanceofatleast20
cmfromallpersonsandmustnotbe
collocatedoroperatinginconjunction
withanyotherantennaortransmitter
withinahostdevice,exceptas
describedinaccordancewithFCC
multi-transmitterproductprocedures.
• OneHFLUM2-WR
• InstallationInstructions
Needed for installation
• Twomountingscrews
• Fixtureorlistedenclosure
Applications
• Widevarietyofinteriorspaces
includingofces,conferencerooms,
classrooms
Intended uses
• Forindooruseonly
• Sensormountsinsidealightingxture
Usage considerations
• Whenuorescentlampsarenewor
atcoldtemperatures,thesensormay
detectgasmovinginsidethelamps.
Inthiscase,switchthelightsOFFand
reducethereachsetting.
• Useonlyhighqualitybrand-name
lamps.
• Fixturecongurationscanvary
considerably.Sincemetalsurfaces
reecthigh-frequencysignals,the
detectionpatternmayvaryfromthe
standardpublishedcoveragesor
reach.Eachxturedesignmustbe
testedforpropercoverageaccuracy.
Package Contents
Installation Overview
www.steinel.net [phone]
WARNING
• Turn power off at the circuit breaker before installing the sensor
• Sensor module must be installed and used in accordance with appropriate
electrical codes and regulations
• Installation by a qualified electrician is recommended
2