Datasheet

MSDS-No.: 44814
V001.3
Technomelt Q 9270 G Page 2 of 2
After eye contact:
After contact with the hot melt: cool with water, seek medical advice
After ingestion:
If adverse health effects persist seek medical advice.
5. Fire-fighting measures
Suitable extinguishing media:
All common extinguishing agents are suitable.
Extinguishing media which must not be used for safety reasons:
High pressure waterjet
Special protection equipment for fire-fighters:
Wear protective equipment.
Wear self-contained breathing apparatus.
Combustion products or gases to be formed:
carbon monoxide
6. Accidental release measures
Personal precautions:
Wear protective equipment.
Environmental precautions:
Do not empty into drains / surface water / ground water.
Process for cleaning and take-up:
Allow to solidify.
Remove mechanically.
7. Handling and storage
Handling:
Ensure that workrooms are adequately ventilated.
Storage:
Ensure good ventilation/extraction.
Store in a cool, dry place.
8. Exposure controls / personal protection
Components with specific control parameters for workplace:
none
Additional information for system design:
Ensure good ventilation/suction at the workplace.
Hand protection:
Wear refractive gloves while working with the hot melt.
Eye protection:
Protective goggles
General protection and hygiene measures:
When using do not eat or drink.
Wash hands before work breaks and after finishing work.
Pollution at the working place can be excluded in normal processing procedures.