Instructions

– 20 –
Time setting (Fig.6.1/E)
The time you want the LED floodlight to stay on
for (main light) is infinitely adjustable from approx.
8seconds to a maximum of 35minutes. Any
movement detected before this time elapses will
restart the timer.
– Control dial set to + = longest time,
approx. 35minutes
– Control dial set to – = approx. 8seconds
Twilight setting (Fig.6.1/F)
The LED floodlight's chosen response threshold
can be infinitely varied from approx. 2 to 1000lux.
– Control dial set to
= daylight operation
(independent of ambient brightness)
– Control dial set to
= night-time operation
(approx. 2 lux)
The control dial must be turned to
when
adjusting the detection zone and performing the
functional test in daylight.
Note:
When setting the detection zone, we recommend
selecting the shortest time.
Note:
After the LED floodlight switches OFF, it takes
approx. 1 second before it is able to start detecting
movement again. The LED floodlight will only
switch ON in response to movement once this
period has elapsed.
XLEDhome2SC
Factory settings
Twilight setting: 2000 lux, daytime mode, lux teach
Time setting: 5seconds
Reach setting/adjustment
The detection zone can be optimised to suit
requirements.
– Sensor unit swivels through 180°. (Fig.6.3)
– Sensor unit tilts through 90°. (Fig.6.6)
Adhesive shroud (Fig.6.4)
The film shroud can be used for masking out any
number of lens segments to limit reach as required.
Inadvertent triggering is ruled out or the sensor can
be targeted to watch over danger spots (Fig.6.5).
Other information:
Floodlight adjustment range (Fig.6.2)
Setting functions
– Setting via control dial (XLED home 2 S/SL S)
– Setting via Smart Remote app (XLED home 2 SC)
Note:
The settings last selected on the control will be
used.
Smart Remote app (XLED home 2 SC)
To configure the LED floodlight via smartphone
or tablet, you must download the STEINEL Smart
Remote app from your app store. You will need a
Bluetooth-capable smartphone or tablet.
Android
iOS
Additional functions only via the
Smart Remote app:
– Twilight setting 2 - 2000lux, daytime mode,
lux teach, time teach
– Time setting 5s - 60min
– ON / OFF times based on time of day
– Night economy mode
– Reach setting based on sensitivity
– Group interconnection and naming lights / groups
– Manual override 4h ON / 4h OFF
– Password protection
The functions of the LED floodlight can be set via
smartphone or tablet. Bluetooth interconnection is
only possible via smartphone or tablet.
Note:
After the LED floodlight switches OFF, it takes
approx. 1second before it is able to start detecting
movement again. The LED floodlight will only
switch ON in response to movement once this
period has elapsed.