Certifications 2

according to Regulation (EC) No 1907/2006
Safety Data Sheet
STEINEL GmbH
Klebestick 11mm
Revision date: 13.03.2018 Product code: Page 2 of 8
SECTION 4: First aid measures
4.1. Description of first aid measures
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data
sheet if possible).
General information
In case of accident by inhalation: remove casualty to fresh air and keep at rest. In case of respiratory tract
irritation, consult a physician.
After inhalation
After contact with molten product, cool skin area rapidly with cold water. Do not peel solidified product off the
skin. Seek medical advice immediately.
After contact with skin
Rinse cautiously with water for several minutes. In case of troubles or persistent symptoms, consult an
ophthalmologist.
After contact with eyes
Rinse mouth thoroughly with water. Let water be drunken in little sips ( dilution effect). Do NOT induce vomiting.
In all cases of doubt, or when symptoms persist, seek medical advice.
After ingestion
4.2. Most important symptoms and effects, both acute and delayed
No information available.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Carbon dioxide (CO2). Dry extinguishing powder. alcohol resistant foam. Atomized water.
Suitable extinguishing media
High power water jet.
Unsuitable extinguishing media
5.2. Special hazards arising from the substance or mixture
Can be released in case of fire: Carbon dioxide (CO2), Carbon monoxide Nitrogen oxides (NOx), aldehydes,
Ketone, Hydrocarbons, Acid
In case of fire: Wear self-contained breathing apparatus.
5.3. Advice for firefighters
Collect contaminated fire extinguishing water separately. Do not allow entering drains or surface water.
Co-ordinate fire-fighting measures to the fire surroundings.
Additional information
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Avoid dust formation.
Do not breathe dust.
Wear personal protection equipment (refer to section 8).
Discharge into the environment must be avoided.
6.2. Environmental precautions
Take up mechanically.
Treat the recovered material as prescribed in the section on waste disposal .
Clean contaminated objects and areas thoroughly observing environmental regulations.
6.3. Methods and material for containment and cleaning up
GB - EN Print date: 14.03.2018Revision No: 2,0