Virtual Guitarist

VIRTUAL GUITARIST
“ELECTRIC EDITION”
34 English
Effect handling for parts
Effect setting
In Virtual Guitarist each of the 8 parts has its own effect buffer (set-
ting). These settings are independent from the effect bank and are
stored with the song.
When the button Part is active, selecting a part also calls the effect
setting for this part. Alternately, you can retain the same effect setting
for the entire player by clicking the Player button.
Switching effect settings within one part
As a bonus feature you can even select effect settings of other parts
for the active part. For this purpose, MIDI program change numbers 9
to 16 are reserved, while numbers 1 to 8 select parts.
❐ Example: To select part 2 with the effect setting of part 7, send program change
numbers 2 immediately followed by 15.
Tempo-syncing effects
You can synchronize time and speed parameters of all effects devices
to the song tempo, e.g. to let the phaser rotate in 2-bar cycles or to
create complex rhythmical patterns with the delay unit.
To synchronize an effect unit to the song tempo…
1. activate its Sync switch,
2. select a note resolution with the time or speed control.
The note value is shown in a little display underneath the knob.
T stands for triplets, D for dotted.