Virtual Bassist

Table Of Contents

Virtual Bassist

ENGLISH

Octaver

The Octaver adds a second pitched bass signal. This is a very com-

mon effect to make the bass sound fatter or growly. A whiff of a fifth, a

third or an octave softly added to Virtual Bassist’s signal will make it

sound much more dense.

Try turning the Mix knob to maximum and the Tone to very low, add

some chorus and you will end up with a quite synthetic bass sound.

Setting up the Octaver:

1. Turning the Mix knob to the right increases the level of the second

harmony bass generated by the Octaver.

2. The Tone knob sets the pitch of the harmony bass generated by the

Octaver. Fully to the left produces a signal one octave lower than the

original, fully to the right one octave up.

Please note that the Octaver will work properly only with higher bass

notes, lower bass notes are too low for the Octaver to track.