Electric Bass

Room Size
Controls the dimensions of the simulated room. At a setting of 100 %, the
dimensions correspond to a cathedral or a large concert hall. At a setting of 50 %, the
dimensions correspond to a medium-sized room or studio. Settings below 50 %
simulate the dimensions of a small room or a booth.
Shape
Controls the attack of the reverb tail. At a setting of 0 %, the attack is more
immediate. The higher this value, the less immediate the attack.
Time
Controls the overall reverb time of the tail. The higher this value, the longer the
reverb tail will decay. At a setting of 100 %, the reverb time is innitely long.
ER/Tail
Sets the level balance between the early reections and the reverb tail. At a setting of
50 %, early reections and tail have the same volume. Settings below 50 % raise the
early reections and lower the tail. As a result, the sound source moves towards the
front of the room. Settings above 50 % raise the tail and lower the early reections,
and the sound source moves towards the back of the room.
Mix
Sets the ratio between the dry and the wet signal.
WahWah
Pedal
Controls the lter frequency sweep.
Bass Amplier
The bass amplier comes with six different amplier and four different speaker cabinet
emulations that can be freely combined.
Electric Bass
Effects Section
16