Electric Bass

Mix
Sets the ratio between the dry and the wet signal.
Phaser
Sync
Activate this parameter to synchronize the effect to the host application. If Sync is
activated, you can set the Rate value in fractions of beats.
Rate
Allows you to set the sweep rate. This parameter can be synchronized to the project
tempo.
Width
Determines the width of the modulation effect between higher and lower
frequencies.
Tone
Allows you to attenuate the low frequencies.
Mix
Sets the ratio between the dry and the wet signal.
Flanger
Sync
Activate this parameter to synchronize the effect to the host application. If Sync is
activated, you can set the Rate value in fractions of beats.
Rate
Allows you to set the sweep rate. This parameter can be synchronized to the project
tempo.
Depth
Sets the intensity of the pitch modulation.
Feedback
Adds resonances to the effect. This allows for jet-like sweeps of the sound.
Tone
Adjusts the tone color of the feedback. At lower values, the feedback is less bright.
Mix
Sets the ratio between the dry and the wet signal.
Electric Bass
Effects Section
12