User manual

4.4 Effects

As explained before, the Performer application features built-in effects

for the artists’ monitoring. These can be recorded in Cubase / Nuendo,

or, when fx record is off, are only audible by the artist. As with all other

Monitor mixer controls, they can be accessed by both the artist and the

engineer remotely. If the artist knows how to deal with the mixer, he

or she can of course set up their own listening experience, but the good

news is that this task can also be left to the engineer like in a professional

recording room-to-room situation.

4.4.1 Reverb

The Reverb is fed by the send controls of each channel in the Performer

Monitor mixer. Those sends are not useful, and thus not available for the

MASTER and STUDIO channels. Reverb is the only effect global to all

channels, other fx are available per channel.

: On/Off

Sets the Reverb active or inactive.

: Reverb

Sets the Reverb volume (the "wet" portion of the reverberation sig-

nal).

: Size

Sets the size of the reverberation room, and thus the length (dura-

tion) of reverberation.

: Damp

Sets how fast the reverb signal is loosing high frequency content

during its lifetime (how fast it is becoming "dull").

: Width

Sets the stereo width of the reverberation signal. Higher values

increase the stereo with.

4.4.2 EQ

: On/Off

Sets the EQ active or inactive.

: Bass

Sets the amount of low frequency (80 Hz) increase (rotary knob

right to 12 o’clock position) or decrease (rotary knob left to 12

o’clock position).

: Mid

Sets the amount of mid frequency (as set by "Mid Freq") increase

or decrease.