User manual

performer via the Control Room VST Connect Cue Mix channel.

The performer performs in sync to this playback and the result

is sent back to Cubase / Nuendo so that when playback actually

starts to become audible there, the artist’s audio signal has arrived

for listening and recording in perfect sync to the project timeline.

You can enter a value between 0.5 and 5 seconds. Usable delay

times should be between 0.75 and about 1.5 seconds. The more

time VST Connect is given to manage the data, the more reliably

the system works. This greatly depends on the quality of the Inter-

net connection. If the sync LED in the diagnostics section lights up

during playback often, consider increasing this delay time.

: Encryption

This is only available with the PRO version of VST Connect. Allows

you to encrypt the transmission of audio and video data in both

directions.

: HD Recording Bits

This is only available with the PRO version of VST Connect. Set

the audio quality (16 or 24 bits) of HD ﬁles recorded by the Per-

former application when HD recording is enabled.

2.9.2 Performer

These settings do not have any inﬂuence on the Cubase / Nuendo VST

Connect plug-ins but merely remote control conﬁguration settings in the

Performer application. Of course, you have to be connected; then, you

can help the artist to set up his system via this panel. These controls

can also be accessed by the artist in the Performer application at any

time; this is why the detailed explanation of these items is to be found in

the Performer section.