User manual

VST Connect Performer
Plug-In Manager
38
Video Upstream
Open this pop-up menu and select the video upstream rate for the signal sent
to Cubase/Nuendo. The same rules apply.
Video Device
Open this pop-up menu and select the video device to use for communication
with the engineer. You can send any video signal that is provided by the
operating system.
Video Mirror
Sometimes it is useful to mirror the incoming video display. This setting allows
for a horizontally mirrored video display.
MIDI Input
Allows you to select the hardware MIDI input device and port.
MIDI Output
Allows you to select the hardware MIDI output device and port.
MTC Output
The Performer application can send MIDI Time Code (MTC) via a MIDI output
port selected here. For MTC to be active, the MTC Frame Rate must be set
as well.
MTC Frame Rate
Defines the frame rate for MTC (MIDI Time Code) to be sent, or switches
MTC output off. A MIDI port for MTC must also be set with the MTC Output
setting for MTC to work.
Auto save
Set the time for the new auto-save feature. When connected, the mixer and
recorded HD audio files information is always stored along with the
Cubase/Nuendo project on the other side. You can also transfer the
Performer project along with the HD audio files as you like (Dropbox, FTP, mail
etc) and import it in Cubase/Nuendo manually when you are off-line. HD
recording is only available when the VST Connect PRO plug-in is used.
Usually, the project is saved when the connection is closed. Auto-save makes
sure that the project is saved regularly so to help should the system crash.
When not connected, local settings (like faders, input and output buses etc)
are also saved on the artists' computer such that they can be restored the next
time the Performer application is opened.
Plug-In Manager
This section provides an overview of VST Instruments and VST effects plug-ins
which are installed on the Performer's system. The Plug-in Manager supports VST
2 and VST 3 plug-ins, but it does not support so called “Bridging”. You can only
use either 32 bit or 64 bit plug-ins, depending on the VST Connect Performer
version that you have installed.