User manual

VST Connect
Setup Tabs
21
Video Device
Open this pop-up menu and select the video device to use for communication
with the performer. You can send any video signal that is provided by the
operating system. You may also choose to select "No device" in order to free
the connection from the video data stream if there is no need for the artist to
see your video.
Video Mirror
Sometimes it is useful to mirror the incoming video display. This option allows
for a horizontally mirrored Performer video display.
Chat Latency
Allows you to determine the latency (delay) of the Talkback signal while
neither playback nor recording are active. In Auto mode, the ideal latency is
processed. This latency is dynamic. However, you can select a fixed latency
here, but this may fail to enable chatting altogether, so if there is no need or
you don't quite understand this setting, you are advised to keep the default
"Auto" setting.
Remote Delay Seconds
When the transport in Cubase/Nuendo is started, VST Connect delays
playback by the time you specify here. During this delay, playback is started
internally, and the cue mix is transferred to the performer via the Control Room
VST Connect Cue Mix channel. The performer performs in sync to this
playback and the result is sent back to Cubase/Nuendo so that when
playback actually starts to become audible there, the artist’s audio signal has
arrived for listening and recording in perfect sync to the project timeline.

You can enter a value between 0.5 and 5 seconds. Usable delay times should
be between 0.75 and about 1.5 seconds. The more time VST Connect is
given to manage the data, the more reliably the system works. This greatly
depends on the quality of the Internet connection. If the sync LED in the
diagnostics section lights up during playback often, consider increasing this
delay time.
Encryption
This is only available with the PRO version of VST Connect. Allows you to
encrypt the transmission of audio and video data in both directions.
HD Recording Bits
This is only available with the PRO version of VST Connect.
Set the audio quality (16 or 24 bits) of HD files recorded by the Performer
application when HD recording is enabled.