User manual

VST Connect
Connection
11
PROCEDURE
1. Click the "gearwheel" item on the lower right of the VST Connect editor
window and select the "Performer" tab. In the "Audio Device" item, choose an
audio device of the Performer's computer from the list.
2. If you cannot hear the artist yet, click the toolbox icon again to close the
settings page, and choose his or her microphone's port on top of the "Mic"
channel in the VST Connect mixer.
3. It is also important that the audio track (channel) that you want to record the
artist to in Cubase/Nuendo has the Monitor function activated. This is usually
automatically engaged when you set that track to record mode, depending on
Cubase/Nuendos' "Auto Monitor" settings in the "Preferences" menu ("VST"
tab). If in doubt, set this to "Tapemachine Style".
4. For the artist to hear his or her monitoring (headphone) signals, you may also
have to choose the correct output ports above the "MASTER" channel found
in the Monitor mixer all to the left.
RESULT
You are now ready to record the artist just like with any other recording you are used
to! You will probably want to import some playback audio file for the artist etc. Just
use Cubase/Nuendo the same way you would if you were recording yourself or
somebody else.