User Manual

Usage Examples
UR28M Operation Manual 27
Operation
1.
Play back some music with your DAW
software or music player.
2. Control the monitor sound by using the
following buttons and knobs.
OUTPUT button A–C
OUTPUT LEVEL knob
MUTE button
MONO MIX button
DIM button
For details on the buttons and knobs, refer to
the “Front Panel” (page 6) in the section “Panel
Control and Terminals (Details).”
The procedures are now complete.
Using the Device Without a
Computer
This section shows how to use the device without a
computer, allowing you to use it as a standalone
mixer or A/D - D/A converter. You can save the DSP
mixer and DSP effect settings configured by the
dspMixFx UR28M to the device. These settings are
maintained even if you turn off the power of the
device.
Connection Example
Procedures
1.
Connect the device to a computer with a
USB cable.
2. Turn on the device.
3. Open the dspMixFx UR28M.
For instructions on opening the dspMixFx
UR28M, refer to the “How to Open the Window”
(page 11) in the section “dspMixFx UR28M.”
4. Configure the DSP mixer and DSP effect
settings.
5. When you make the settings, click [X] on the
upper left of the window to close the
dspMixFx UR28M.
The settings of the dspMixFx UR28M are saved
to the device.
The operation is now complete.
Monitor speakers Microphone
Portable audio player
Guitar
Synthesizer