User Manual

Panel Controls for the Software Programs
UR28M Operation Manual 21
•When using the Channel Strip on Cubase series
programs, you can share the settings between the
built-in Channel Strip and the Channel Strip of the
VST Plug-in version as a preset file.
•When using the built-in Channel Strip on Cubase
series programs, turn on the “Direct Monitoring”
setting in the program.
•When assigning the Channel Strip of the VST Plug-
in version to the effect slot on Cubase series
programs, select it from the “Dynamics” category
(in the case of the default settings).
Screenshot
How to Open the Window
From Dedicated Windows for Cubase Series
Click “Channel Strip Edit” (page 18) in the section
“Input Settings Window.”
From the dspMixFx UR28M
Click “Channel Strip Edit” (page 13) in the section
“Channel Area.”
Panel Controls
Common to Compressor and Equalizer
1 MORPH
Adjusts the parameter of the Sweet Spot Data.
You can simultaneously adjust the compressor
and equalizer settings which are set to five points
around this knob by turning this knob. When you
set the knob to the middle of adjacent two points,
the compressor and equalizer settings will be set
to an intermediate value.
2 Sweet Spot Data
Selects the Sweet Spot Data (page 28).
3 TOTAL GAIN
Adjusts the total gain of the Channel Strip.
Range: -18.0 dB – +18.0 dB
4 Level Meter
Indicates the output level of the Channel Strip.
Compressor
1 ATTACK
Adjusts the attack time of the compressor.
Range: 0.092 msec – 80.00 msec
2 RELEASE
Adjusts the release time of the compressor.
Range: 9.3 msec – 999.0 msec
3 RATIO
Adjusts the ratio of the compressor.
Range: 1.00 – ∞
4 KNEE
Selects the knee type of the compressor.