User Manual

Panel Controls for the Software Programs
UR28M Operation Manual 19
7 Channel Strip Insertion Location
Selects the insertion location of the Channel Strip.
You can apply four Channel Strips to mono
channels, or two Channel Strips to a stereo
channel.
8 Output Position of the Direct Monitoring
Signal
Indicates the position from which the audio
signals for monitoring will be output when turning
on Direct Monitoring in the device settings on
Cubase.
9 REV-X Edit
Opens the “REV-X” (page 23) setup window.
) REV-X Send
Adjusts the signal level which is sent to the
REV-X.
Range: -∞ dB – +6.00 dB
! Headphones Edit
Opens the “Headphones Window” (page 19) in
the section “Dedicated Windows for Cubase
Series.”
@ Reverb Routing Edit
Opens the “Reverb Routing Window” (page 19) in
the section “Dedicated Windows for Cubase
Series.”
Hardware Setup Window
Headphones Window
This is the window for selecting the output signal of
the PHONES on the device. (PHONES 2 only)
1 Phones 1
Indicates the output signal of PHONES 1.
2 Phones 2
Selects the output signal of PHONES 2.
Reverb Routing Window
This is the window for configuring the “REV-X” (page
23) settings.
1 REV-X Edit
Opens the “REV-X” (page 23) setup window.
2 REV-X Type
Selects the REV-X type.
Option: Hall, Room, Plate
3 REV-X Time
Adjusts the reverb time of the REV-X. This
parameter links to Room Size. The adjustable
range varies depending on the REV-X type.
4 REV-X Send Source Select
Selects the send source signal which is sent to
the REV-X. You can select one signal at a time.
The checkmark will be on the selected signal.
5 REV-X Send Source
Indicates the signal which is sent to the REV-X.
6 REV-X Return Level
Indicates the return level of the REV-X.
7 REV-X Return Level knob
Adjusts the return level of the selected
(highlighted) signal.
Range: -∞ dB – +6.00 dB
Insertion
location
Description
Upper
(OFF)
Channel Strip is not applied.
Middle
(MON.FX)
Applies the Channel Strip to only the
monitor signal (sent to the device).
Lower
(INS.FX)
Applies the Channel Strip to both the
monitor signal (sent to the device)
and the recording signal (sent to the
DAW software).
REV-X type Range
Hall 0.103 sec – 31.0 sec
Room 0.152 sec – 45.3 sec
Plate 0.176 sec – 52.0 sec