User Manual

Panel Controls for the Software Programs
UR28M Operation Manual 13
5 Channel Strip Insertion Location
Selects the insertion location of the Channel Strip.
6 Channel Strip On/Off
Turns the Channel Strip on (lit) and off (dark).
You can apply four Channel Strips to mono
channels, or two Channel Strips to a stereo
channel.
7 Channel Strip Edit
Opens (lit) and closes (dark) the “Channel Strip”
(page 20) setup window.
8 Effect Type
Indicates the effect type.
9 REV-X Send
Adjusts the signal level which is sent to the
REV-X.
Range: -∞ dB – +6.00 dB
) Pan
Adjusts the pan.
Range: L16 – C – R16
! Mute
Turns the mute on (lit) and off (dark).
@ Solo
Turns the solo on (lit) and off (dark).
# +48V
Indicates the on/off status of the phantom power
function of the device.
$ Fader
Adjusts the signal level.
Range: -∞ dB – +6.00 dB
DAW Area
This is the area for configuring the DAW channel
settings.
1 Level Meter
Indicates the signal level.
2 Pan
Adjusts the pan.
Range: L16 – C – R16
3 Mute
Turns the mute on (lit) and off (dark).
4 Solo
Turns the solo on (lit) and off (dark).
5 Fader
Adjusts the signal level.
Range: -∞ dB – +6.00 dB
Option Description
MON.FX Applies the Channel Strip to only the
monitor signal (sent to the device).
INS.FX Applies the Channel Strip to both the
monitor signal (sent to the device)
and the recording signal (sent to a
DAW software).