User Manual

Using with an iOS device
UR-RT4 / UR-RT2 Operation Manual 32
Recording/Playback
This section covers basic instructions for operating with
Cubasis (an iPad app sold by Apple).
NOTE
• iOS app may not be supported in your area. Please check
with your Yamaha dealer.
• For the latest Cubasis information, see the Steinberg web
site below.
http://www.steinberg.net/
1. Open Cubasis.
2. Tap the [MEDIA] tab on the upper left of the
screen.
[Create New Project] is shown in the bottom of the
screen.
3. Tap the [Create New Project].
4. Enter a project name and tap [OK] in the [New
project] window.
5. Tap [+AUDIO] to add an AUDIO track.
6. Tap on the far left of your screen to show the
track menu, with [Audio input] at the top.
7. Tap to show the details window and set the
input bus for the track by tapping a number.
8. Tap to turn monitoring on (lit).
9. Adjust the input signal level of the microphone
with the [GAIN] knob on the device.
10. While singing into the microphone, adjust the
output signal level of the headphones with the
[PHONES] knob on the device.
11. Tap [I] to start the recording.
12. Tap [>] to stop the recording.
Setting optimum recording levels
Adjust the gain knobs so that the [PEAK] indicator flashes
briefly at the loudest input volume.