User Manual

ManualsBrandsSteinberg ManualsAudio Interfaces & SystemsUSB Interface with Transformers by Rupert Neve Designs

Software

UR-RT4 / UR-RT2 Operation Manual 20

4 KNEE

Selects the knee type of the compressor.

5 SIDE CHAIN Q

Adjusts the band width of the side chain filter.

Range: 0.50 - 16.00

6 SIDE CHAIN F

Adjusts the center frequency of the side chain filter.

Range: 20.0 Hz - 20.0 kHz

7 SIDE CHAIN G

Adjusts the gain of the side chain filter.

Range: -18.0 dB − +18.0 dB

8 COMPRESSOR On/Off

Turns the compressor on (lit) and off (unlit).

9 Compressor Curve

This graph indicates the approximate compressor

response.

The vertical axis indicates the output signal level, and the

horizontal axis indicates the input signal level.

) Gain Reduction Meter

Indicates the gain reduction.

! DRIVE

Adjusts the degree to which the compressor is applied.

The higher the value, the greater the effect.

Range: 0.00 − 10.00

Equalizer

1 Equalizer Curve

This graph indicates the characteristics of the 3-band

equalizer. The vertical axis indicates the gain, and the

horizontal axis indicates the frequency. You can adjust

LOW, MID, and HIGH by dragging each handle in the

graph.

2 LOW F

Adjusts the center frequency of the low band.

Range: 20.0 Hz − 1.00 kHz

3 LOW G

Adjusts the gain of the low band.

Range: -18.0 dB − +18.0 dB

4 MID Q

Adjusts the band width of the middle band.

Range: 0.50 − 16.00

5 MID F

Adjusts the center frequency of the middle band.

Range: 20.0 Hz − 20.0 kHz

6 MID G

Adjusts the gain of the middle band.

Range: -18.0 dB − +18.0 dB

7 HIGH F

Adjusts the center frequency of the high band.

Range: 500.0 Hz − 20.0 kHz

8 HIGH G

Adjusts the gain of the high band.

Range: -18.0 dB − +18.0 dB

9 EQUALIZER On/Off

Turns the equalizer on (lit) and off (unlit).

Options Description

SOFT Produces the most gradual change.

MEDIUM Results in a setting midway between SOFT

and HARD.

HARD Produces the sharpest change.