User Manual

Software

UR-RT4 / UR-RT2 Operation Manual 18

3 REV-X Time

Adjusts the reverb time of REV-X. This parameter links to

Room Size. The adjustable range varies depending on the

REV-X type.

4 REV-X Send Source Select

Indicates the send source signal which is sent to REV-X.

The UR-RT2 is Mix 1 L/R only.

5 REV-X Send Source

Indicates the signal which is sent to REV-X.

6 REV-X Return Level

Indicates the return level of REV-X.

7 REV-X Return Level Knob

Adjusts the return level of the selected (highlighted)

signal.

Range: - ∞ dB − +6.00 dB

Settings Windows

This window is for configuring the device settings.

1 INPUT 5/6 LEVEL {INPUT 3/4 LEVEL}

Selects the input signal of [LINE INPUT 5/6] {INPUT 3/4

LEVEL}.

Options: +4dBu, -10dBV

2 HPF

Selects the cutoff frequency of the high pass filter (not

available on [LINE INPUT 5/6] { [LINE INPUT 3/4] } ).

Options: 120Hz, 100Hz, 80Hz, 60Hz, 40Hz

3 LOOPBACK

Turns the Loopback function on (lit) and off (unlit).

Refer to the “LOOPBACK” in the section “dspMixFx UR-

RT” (page 15).

REV-X type Range

Hall 0.103 sec − 31.0 sec

Room 0.152 sec − 45.3 sec

Plate 0.176 sec − 52.0 sec