User Manual

12.13 Steinberg Envelope Shaper 343

12.13 Steinberg Envelope Shaper

EnvelopeShaper can be used to cut or boost the gain of the Attack and Release phase of

audio material. You can either use the knobs or drag the breakpoints in the graphical display

to change parameter values. Be careful with levels when boosting the gain and if needed

reduce the Output level to avoid clipping.

The following parameters are available:

Attack

(-20 to 20dB) Changes the gain of the Attack phase of the signal.

Length

(5 to 200ms) Determines the length of the Attack phase.

Release (-20 to 20dB)

Changes the gain of the Release phase of the signal.

Output

(-24 to 12dB) Sets the output level.