3.0

84
The Multi Zone
The Track Inspector Page
Instrument
The Instrument panel contains eight controls that are provided by the selected preset.
Insert Effects Panel
Each track can have three pre-fader insert effects. Pre-fader means that raising or
lowering the track fader does not affect how much of the audio signal is sent to the
effect.
Insert Effect 3 is positioned in the signal chain after the equalizer. That means that any
changes to the equalizer settings affect the signal that is sent to the effect.
For details about the different effects, see “Effects Parameters” on page 119.
Equalizer Panel
The Equalizer panel features a three-band EQ. The low band sets the frequency at
which the bass tones are affected. The middle band sets the frequency at which the
middle tones are affected. The high band sets the frequency at which the high tones
are affected.
• The Gain slider determines the gain or volume of the EQ band.
• The Frequency slider determines the frequency of the EQ band.
Transpose Play
Direction
Determines whether the pattern’s key goes up, down, or both.
Arpeggiator Play
Mode
Determines what type of pattern is played back. If you select
Phrase, you can play a single note to trigger a scale.
Parameter Description