3.0

39
Mixing
Introduction
In this chapter, you will learn how to create a mix ready with proper levels, EQs, and
effects. You will also add automation and export the audio.
Setting Levels
The first thing that you need to do is to set the levels for the project so that you can
add EQ and effects later.
• Load the project “Mixing 1” found in the “Sequel Tutorial 3” folder.
1. Open the Mixer Page in the Multi Zone.
2. Press [Space] to start playing back the project and listen to your mix.
3. Move the faders on each track so that you hear everything the way you like it.
Ö
The following sections make reference to tutorial projects, located in the default
Sequel project folder.
!
Be careful how high you raise the faders. Make sure that everything is at a good
volume without clipping, distortion, or any other unpleasant sounds. If the Master
fader area turns red, your tracks are too loud. If this happens, lower the levels.