3.0

20
Recording
Recording Audio
Saving a Project
1. Open the Project menu and select “Save Project”.
2. Type in a name for your project, for example “First Sequel Project”.
3. Click OK.
The project is saved in the folder you specified on the Settings Page.
Adding an Audio Track
The following sections make reference to tutorial projects, located in the default
Sequel project folder.
• Load the project called “Recording” found in the “Sequel Tutorial 1” folder.
You will now add an audio track to record onto. For this example, you will record a
guitar. The method is the same for all instruments.
1. Click the “Add Track” button below the track list.
The Add Track dialog opens.
2. Select the Audio option.
3. Select “empty” and click OK.
This adds an audio track to the project.
4. Double-click the track name and change it to “Guitar”.
Ö
By default, the audio input for the track is set to the first input available on the “Input
Selection” pop-up menu. To see the pop-up menu, you may have to increase the track
height.