3.0

114
Advanced Features
Quick Controls
Quick Controls
Quick controls are parameter assignments for effect or instrument plug-ins that are
shown on the Track Inspector Page of the Multi Zone.
For each effect or instrument plug-in, eight quick control slots are available. These
give you instant access to the plug-in parameters. Sequel features a default
assignment for the main parameters.
To change the assignment, proceed as follows:
1. Activate the “Quick Control Learn Mode” button.
The plug-in window opens.
2. In the quick control panel, select a quick control slot.
You can press [Tab] or use the cursor keys to step through the quick control slots.
3. In the plug-in window, click a parameter.
The parameter is assigned to the quick control and the quick control slot is
renamed accordingly.
4. Repeat these steps for all other quick controls that you want to change.
5. Deactivate the “Quick Control Learn Mode” button.
The new assignment is used from now on.
Quick control
slots
Quick
controls
Quick Control
Learn Mode
Get Default Quick
Controls from Plug-in
Open/Close
Plug-in Window
Ö
If you select a quick control slot in learn mode and press [Delete] or [Backspace], the
slot is emptied. This is helpful, for example, if you want to use less than eight quick
controls.