3.0

110
Advanced Features
Remote-controlling Sequel
Remote-controlling Sequel
It is possible to remote-control certain Sequel functions by assigning external
controllers, for example, small mixers or keyboard controllers with USB or MIDI
connection and the ability to send MIDI messages. This way, you can control special
program parameters using the assigned faders and knobs on your external controller.
The control assignment is saved for the application and will be available for all projects.
You can map the following Sequel parameters and functions to your external controller:
- The transport controls
- The page selection in the Multi Zone (except for the Settings Page)
- The Mixer Page controls
- The controls on the Track Inspector Page panels and the panel selection buttons
- The pattern pad buttons on the Beat Page
- The pads on the Performance Page
- Metronome on/off
The remote assignment is only active if the mapped controls are visible. If you have
connected more than one external controller, use the Remote Controller Source pop-up
menu in the Options section of the Settings Page to select the corresponding input.
Assigning Controllers Using the Mouse
Proceed as follows:
1. Connect your remote device with the USB or MIDI port on your computer and start
Sequel.
2. Click the “Edit Remote Control Assignment” button in the Sequel Pilot Zone.
The main user interface is dimmed, so that you can clearly see which elements can
be assigned to remote controls (indicated by frames).
Ö
If you assign a MIDI controller or a key on your keyboard to a Sequel function, this
controller or key is filtered. For example, it is not available as input for instrument tracks.