2.0

87
Advanced features
Ö Each time you assign a new remote controller to a Se-
quel function, a new entry appears in the list of available
Remote Items. By default, these entries are named Re-
mote Item x, where x represents an incrementing number.
6. To assign another remote controller, click on the next
program function with the mouse.
You can also step through the assignable functions with the arrow keys,
see below.
Ö If you assign the Multi Zone pages first, you can use
the controls on your remote device to switch between the
different pages.
7. To get an overview of the assigned remote objects,
click the Remote Object List button in the lower right cor-
ner of the assignment browser.
All remote controls that have been assigned are now shown.
8. When you are done, click the green button at the top
of the page to switch back to normal mode.
Congratulations! You can now use your remote device to
control the assigned Sequel functions.
Assigning Controllers using key commands
You also assign controllers to Sequel functions using key
commands. Proceed as follows:
1. Press [F] to enter the Edit Remote Control Assignment
mode.
The main user interface becomes dimmed, so that you can clearly see
which elements can be assigned to remote controls (indicated by black
frames).
2. Use the arrow keys to step through the assignable
functions.
The selected control element turns red and the assignment browser ap-
pears to indicate that you can assign a remote control to this function.
3. Move the desired control on your external device to
map the physical control to the program function.
• Use the arrow keys on your computer keyboard to step
through the available parameters.
• Use the [Enter] key on the numeric keypad to make se-
lections, activate functions or to confirm your settings.
• Press [Esc] to exit a List or browser window or deacti-
vate the Edit Remote Control Assignment mode.