2.0

86
Advanced features
Assigning Controllers using the mouse
Proceed as follows:
1. Connect your remote device with the USB or MIDI port
on your computer and start Sequel.
2. Click the Edit Remote Control Assignment button in
the Sequel Pilot Zone.
The main user interface becomes dimmed, so that you can clearly see
which elements can be assigned to remote controls (indicated by black
frames).
3. Select the function you would like to control with your
remote device by clicking on it in the user interface.
The button turns red and the assignment browser appears to indicate
that you can now assign a remote control to this function.
4. Click on the Remote Object List button in the right
corner of the assignment browser to show all elements of
the assignment browser.
The assignment browser consists of the following ele-
ments:
• The Sticky Browser button in the top left corner of the assign-
ment browser indicates if the browser is fixed (closed padlock
symbol) or closes automatically after a few seconds (open
padlock symbol). Click on the button to change its status.
• Click on the small button in the additional Info column to let
the program know that the assigned control is an endless
fader (two arrows forming a circle will appear).
• The Reset Remote Assignment button allows you to remove a
controller assignment from a specific control.
• The default name for the assigned remote control (at the bot-
tom of the list) can be changed allowing you to keep an over-
view of the assigned controls. Just click on the name and enter
a new descriptive and unique name, e.g. the name of the con-
trol on your external device.
5. Move the desired control on your external device to
map the physical control to the program function.
The selected function is now assigned to the control on the remote de-
vice. This is indicated by the corresponding program control turning blue.
At the bottom of the assignment browser it is now indicated which Re-
mote item has been assigned to the selected function.
Sticky
Browser
Reset Remote
Assignment
Remote Object
List button
The name of the
Sequel function
The default or user-defined name
for the assigned remote control.
Assigned Remote
controllers
Additional
Info