2.0

78
The Multi Zone
Start-up Action
This pop-up menu allows you to decide whether Sequel
will create a new project when you load up or load the last
project you were working on.
Audio Settings
Audio Connection
Clicking here brings up a pop-up menu where you can se-
lect which ASIO driver you would like to use for audio
playback.
• Click the “Setup…” button to bring up the control panel
for you audio interface.
• Click “Reset” to reset the ASIO driver settings.
Output Selector
Clicking here brings up a pop-up menu where you can se-
lect the output on the interface that you would like to use
as the output for the project.
Record Format
Here you can select the bit rate you would like to use for
recording. There are two options:
• 16 Bit is the format used for CDs.
• 24 Bit provides noticeably better quality than 16 Bit, but
it also requires more storage space on your hard disk.
User Interface
Panel Color
Use the slider to apply different colors to the main Sequel
program window.
Show Tips
Show tips, when activated, will display tips when you
hover over a button or object.
Options
Instrument Recording – Auto Quantize
If this option is activated, anything recorded on a track will
automatically be quantized.
Instrument Recording – Record Placement Method
(Windows only)
When a MIDI interface sends notes to the application, this
data includes timing information (so-called “timestamps”)
to correctly position the MIDI events on the Sequel time-
line. There may be situations in which these timestamps
are not in sync with the internal timing information of Se-
quel, so recorded MIDI events will not be positioned cor-
rectly (usually, they occur “too late”).
If timing problems with the recorded MIDI events occur
with your operating system, try changing the Record
Placement Method from “A” (uses timing information of
Sequel) to “B” (uses MIDI timestamp) or vice versa.
Metronome – Record/Playback
You can activate or deactivate the Metronome buttons so
that the click will only be active during Record, Playback,
or Playback and Record.
Metronome – Level
You can also adjust the Metronome volume using the
Level slider in the Metronome section.
Remote Controller Source
If you have connected more than one external controller,
use this pop-up menu to select the corresponding input.