2.0

66
The Multi Zone
Adjusting level (gain)
You can adjust the EQs level by raising or lowering the
bass, middle, or treble gain slider.
To do this, click and drag up or down on the desired slider.
Adjusting width
The middle EQ is a parametric EQ. That means that the
frequency range of this EQ can be widened or shortened.
To do this, click on the Middle Width slider and drag right
to widen the range, and left to shorten it.
EQ Presets and Bypass Equalizers
Sequel has built-in EQ presets which you can access by
clicking in the presets field and selecting a preset from the
pop-up menu. Select Reset to clear all EQ settings.
To bypass the EQ, click the “Bypass Equalizers” button.
The Global Effects tab
Each project can have two send effects. These are re-
ferred to as “Global Effects”. You can select any of the
available effects as global effects.
Using global effects can help reduce CPU load on your
computer. If e.g. you find you are using the same reverb
on every track, you can create a “Global Effects” reverb
and use the Amount fader (see below) to send signals to
that reverb.
Every global effect also features presets which can be ac-
cessed by clicking in the “Effect Preset” field.
Here you can select a preset from the menu. Click the
Close button to close the preset window.
Ö Note that the global effects exist only once for your
project, i.e. the effects on this page will not change when
changing to another track.
For details on each effect and its parameters, see “Effects
reference” on page 99.
The Amount fader
To adjust the amount of signal to apply to the send, use
the Amount fader. You can deactivate a send for a parti-
cular track by clicking on the respective Bypass button.
Bypass Equalizers