2.0

65
The Multi Zone
The Track Effects tab
Each track can have two insert effects, which are pre-
fader. That means that raising or lowering the track fader
doesn’t affect how much audio signal is sent to the effect.
Use the “Select Effect Type” pop-up menu to select an ef-
fect and apply it to the track. Every effect also features
presets which can be accessed by clicking in the effect
preset field. Select a preset from the menu and click the
Close button to close the preset window.
The Track Effects can be bypassed by activating the
“Bypass Effect” button.
Each track also features a built-in compressor which is
also pre-fader, but is post EQ, meaning that the audio is
routed through the two insert effects, then the EQ, and
then the compressor.
The Threshold slider determines how much compression
will be added to the signal. This sets a threshold level.
When the signal goes above this level, the Compressor re-
duces the signal. Or in other words: the further to the right
you drag, the more compression you get. Gain Reduction
reflects how much gain or volume is being attenuated.
Ö You can also select a preset from the Compressor
presets pop-up menu.
The Compressor can be bypassed by activating the
“Bypass Compressor” button.
The Equalizers tab
The Equalizers tab features a three band EQ. It features a
low shelf or bass frequency, a parametric mid or middle
frequency, and a high shelf or treble frequency.
The low shelf or bass frequency sets the frequency at which
the low tones will be affected. The parametric mid or middle
frequency sets the frequency at which the middle tones will
be affected. The high shelf or treble frequency sets the fre-
quency at which the high tones will be affected.
Adjusting frequency
You can adjust the frequency of each EQ by clicking on
the frequency slider and dragging left or right.
Effect Presets Select Effect TypeEffects list
Effect parameters
Bypass Effect
Bypass Compressor
Treble (Hi EQ)
Middle (Parametric Mid EQ)
Bass (Low EQ)