2.0

62
The Multi Zone
If you are clipping the Master channel, the channel will be-
come red. Lower the fader to return the channel to normal,
or alternatively lower all track faders by the same amount
to reduce the level going into the Master channel. Click
the Audio Overload button to reset the clipping indicator.
The Track Inspector Page
The Track Inspector Page is where you find the track-re-
lated settings in Sequel, including all of the effect settings.
The Track Inspector Page has a few similarities to the
Mixer Page in that the Master channel is still present on
the right hand side. This time however, there is only one
channel strip present, which represents the selected track
in the Arrange Zone.
You can only edit one track’s settings at a time. To edit a
certain track, select it in the Arrange Zone to make its set-
tings appear on the Track Inspector Page.
The Track Inspector Page features seven tabs. You can
click on a tab to access its controls and see what settings
you have already applied to it.
The Pictures tab
On the Pictures tab of the Track Inspector Page you can
choose a Track Picture for the selected track. This is useful
if you want to be able to recognize your tracks at a quick
glance, e.g. in live performances. You can choose pictures
of the Factory content or add new ones to the User Library.
You can also change the size and the tinting of the pictures
or even rotate them.
Adding Factory Track Pictures
Proceed as follows:
1. Select the track on which you want to insert a track
picture and open the Pictures tab.
The track pictures available in the included Factory content are displayed.
2. Choose one of the pictures from the Factory content
by clicking on it.
The Picture will be displayed on the Pictures tab, in the corresponding
channel strip on the Mixer Page, and in the track list for the selected track
in the Arrange Zone (if the Show Track Pictures button is activated).
…and on the Mixer Page (you might
have to resize the Multi Zone in or-
der to see the pictures).
…in the track list…
The selected picture is displayed on the Pictures tab…