2.0

45
The Pilot Zone
To start playback
• Click on the Play button.
• Press the space bar on your computer keyboard – this
toggles between start and stop.
• Press the [Enter] key on the numeric keypad.
• Double-click in the lower half of the ruler.
To stop playback
• Click on the Play button during playback.
• Press the space bar on your computer keyboard – this
toggles between start and stop.
• Press the [0] key on the numeric keypad.
The Record button
The Record button allows you to record audio events or
instrument parts.
To start recording
• Click on the Record button at any time during playback.
• Press the [*] key on the numeric keypad during playback
or while stopped.
To stop recording
• Click on the Record button during recording.
• Press the [*] key on the numeric keypad.
The Locate buttons
The Locate buttons are used to switch between marker
positions or to go to the beginning or end of your project.
To locate the previous marker or go to the beginning of
the project
• Click on the “Locate Previous Marker” button.
• Press [Shift]+[B] on your computer keyboard.
To locate the next marker or go to the end of the project
• Click on the “Locate Next Marker” button.
• Press [Shift]+[N] on your computer keyboard.
About Cycle mode
The Cycle button activates/deactivates Cycle mode. Cy-
cle mode allows you to loop a section of your song so that
you can hear it again and again.
• To create a cycle region, move your mouse to the top
edge of the ruler (the pointer turns into a pencil), click and
drag.
To activate/deactivate Cycle mode
• Click on the Cycle button.
• Press the [/] key on the numeric keypad.
• Press the [-] key on you computer keyboard.
The Record button
The Locate buttons
The Cycle button