2.0

13
Tutorial 1: Recording
Setting the save folder
In order to save projects in Sequel, it is important to make
sure you know where the projects are going to be saved.
1. Go to the Program Settings Page.
2. Click on the “Project Location” button.
3. A dialog opens allowing you to browse you computer
and find a suitable location. When you installed Sequel it
automatically created a location for saving projects.
4. You can click “Create” to create a new folder if you
would like to save your projects elsewhere.
5. Let’s leave it set to the default folder Sequel has cre-
ated. Click “OK”.
To save a project
1. Open the Project menu and select the “Save Project”
option.
2. Type in a name for your project – you can use “First
Sequel Project” for example.
3. Click “OK”.
The project will automatically be saved in the folder you
specified on the Program Settings Page.
Adding an audio track
Ö The following sections make references to tutorial
projects, located in the default Sequel project folder.
Now let’s add an audio track to record onto. For our exam-
ple we are going to record a guitar. You can also record
bass or whatever instrument you want. The method is the
same for any instrument you wish to record.
Ö By default, the audio input for the track is set to the
first input available in the “Input Selection” pop-up menu.
To be able to see the Input selection, make sure the track
height is set to Large at the bottom of the track list.
1. Click the “Add New Track” button above the track list.
2. In the dialog that appears, select the “Audio” button.
3. Select “empty” and click “OK”. This adds an audio
track to the project.
4. Double-click the track name and change it to “Guitar”.
!
Load the project called “Recording” found in the
“Sequel Tutorial 1” folder.
Click here to select a
different input.