2.0

12
Tutorial 1: Recording
The tutorials
The following chapters provide a quick introduction to Se-
quel. But first, please take a look at the figure below, as it
gives you an overview of the Sequel program interface:
In this first tutorial, we are going to show you how the Pilot
Zone, Arrange Zone, and Multi Zone work together when
recording audio events and Instrument parts.
Recording audio
In this section, we are going to take a look at recording a
guitar line, adding a drum loop and playing it back. Make
sure that you have your audio card set up correctly, see
the chapter “Setting up your system” on page 88.
Creating a new project
By default, Sequel creates a new project when you boot
up the program. You can change this on the Program Set-
tings Page. See the chapter “The Program Settings Page”
on page 77 for more details.
To create a new project if a project is already open
• Open the Project menu and select the option “New
Project”.
This will create a new project with nothing in it and close
the project that was already open. If this project contains
unsaved changes, you will be asked whether these
changes should be saved.
The Pilot Zone is described
in the chapter “The Pilot
Zone” on page 38.
Details on the Arrange
Zone can be found in the
chapter “The Arrange
Zone” on page 49.
The Multi Zone and its various
pages are described in the
chapter “The Multi Zone” on
page 59.
!
You’re not done yet! So far we’ve created a blank
Sequel project. We still need to save the project.