1.0

60
The Multi Zone
Each track also features a built-in one-knob compressor
which is also pre-fader, but is post EQ, meaning that the
audio is routed through the two insert effects, then the
EQ, and then the compressor.
The Compression slider determines how much compres-
sion will be added to the signal. This sets a threshold level.
When the signal goes above the threshold level, the Com-
pressor reduces the signal. Or in other words: the further
to the right you drag, the more compression you get. Gain
Reduction reflects how much gain or volume is being at-
tenuated.
Ö You can also select a preset from the Compressor
presets pop-up menu.
The Compressor can be bypassed by activating the
“Bypass Compressor” button.
The Equalizers tab
The Equalizers tab features a three band EQ. It features a
low shelf or bass frequency, a parametric mid or middle
frequency, and a high shelf or treble frequency.
The low shelf or bass frequency sets the frequency at
which the low tones will be affected. The parametric mid or
middle frequency sets the frequency at which the middle
tones will be affected. The high shelf or treble frequency
sets the frequency at which the high tones will be affected.
Adjusting frequency
You can adjust the frequency of each EQ by clicking on
the frequency slider and dragging left or right.
Adjusting level (gain)
You can adjust the EQs level by raising or lowering the
bass, middle, or treble gain slider.
To do this, click and drag up or down on the desired slider.
Adjusting width
The middle EQ is a parametric EQ. That means that the
frequency range of this EQ can be widened or shortened.
To do this click on the Middle Width slider and drag right
to widen the range and left to shorten it.
Bypass Compressor
Treble (Hi EQ)
Middle (Parametric Mid EQ)
Bass (Low EQ)