1.0

45
The Pilot Zone
The Play button
The Play button allows you to listen back to your project.
To start playback
• Click on the Play button.
• Press the space bar on your computer keyboard – this
toggles between start and stop.
• Press the [Enter] key on the numerical computer keypad.
• Double-click in the lower half of the Ruler Zone.
To stop playback
• Click on the Play button during playback.
• Press the space bar on your computer keyboard – this
toggles between start and stop.
• Press the [0] key on the numerical computer keypad.
The Record button
The Record button allows you to record audio events or
Instrument parts into your project.
To start recording
• Click on the Record button at any time during playback.
• Press the [*] key on the numerical computer keypad dur-
ing playback or while stopped.
To stop recording
• Click on the Record button during recording.
• Press the [*] key on the numerical computer keypad.
The Locate buttons
The locate buttons are used to jump between marker po-
sitions or to go to the beginning or end of your project.
To locate the previous marker or go to the beginning of
the project
• Click on the “Locate Previous Marker” button.
• Press [Shift]+[B] on your computer keyboard.
To locate the next marker or go to the end of the project
• Click on the “Locate Next Marker” button.
• Press [Shift]+[N] on your computer keyboard.
About Cycle mode
The Cycle button activates/deactivates cycle mode. Cycle
mode allows you to loop a section of your song so that
you can hear it again and again.
• To create a cycle region, move your mouse to the top
edge of the ruler zone (the pointer turns into a pencil) and
click and drag.
To activate/deactivate cycle mode
• Click on the Cycle button.
• Press the [/] key on the numerical computer keypad.
• Press the [-] key on you computer keyboard.
The Play button
The Record button
The Locate buttons
The Cycle button