User manual

2. In the Properties panel, activate the following properties, individually or together, in the
Pedal Lines group:
● Line start hook
● Line end hook
3. Select one of the following options from each menu:
● No Hook
● Vertical Hook
● Slant Hook
● Inverse Hook
RESULT
The hook type at the start/end of the selected pedal lines is changed.
Changing the continuation line type of pedal lines
You can change the type of continuation line used for the different types of pedal lines
individually.
PROCEDURE
1. Select the pedal lines whose continuation line type you want to change.
2. In the Properties panel, activate Continuation type in the Pedal Lines group.
3. Select one of the following continuation types from the menu:
● Line
● Sign at End
● Sign at End and Dashed Line
● None
RESULT
The continuation line type of the selected pedal lines is changed.
Parenthesizing pedal line continuation signs
You can show individual pedal line continuation signs with/without parentheses. You can do
this for the current layout and frame chain only or for all layouts and frame chains. Pedal line
continuation signs are shown by default at the start of new systems when pedal lines continue
across system/frame breaks.
PREREQUISITE
You have chosen the appropriate property scope for local properties.
PROCEDURE
1.
Select the pedal lines whose continuation sign appearance you want to change.
2.
In the Properties panel, activate Show continuation sign in parentheses in the Pedal Lines
group.
3.
Activate/Deactivate the corresponding checkbox.
Pedal lines
Pedal line start signs, hooks, and continuation lines
809
Dorico Elements 3.5.12