User manual

EXAMPLE
Guitar bend with whole step
interval, displayed as
full
Guitar pre-bend with
minor third interval,
displayed as
1 1/2
Vibrato bar dive and return
with whole step interval,
displayed as
-1
Guitar post-bend with
microtonal interval,
displayed as
1/4
Bend intervals for guitar bends, pre-bends, pre-dives, and post-dives are positioned above the
arrowhead/line for the corresponding notation. For dives and returns, bend intervals appear at
the point of the V, either above or below the staff according to the pitch direction of notes in the
dive and return.
Bend intervals appear only on tablature for guitar bends, pre-bends, pre-dives, and dives and
returns. They appear on both notation staves and tablature for guitar post-bends.
RELATED LINKS
Guitar bends on page 768
Guitar pre-bends and pre-dives on page 771
Guitar post-bends on page 772
Vibrato bar dives and returns on page 773
Tablature on page 917
Changing vibrato bar dip intervals on page 782
Input methods for guitar bends and guitar techniques on page 278
Hiding/Showing guitar bend hold lines
Guitar bend hold lines indicate that the bend should be held for the duration of the note, which is
usually a tied note. You can hide/show hold lines on guitar bends on tablature.
NOTE
These steps only apply to guitar bends. You cannot show hold lines on pre-bends or releases.
PROCEDURE
1.
Select the guitar bends on which you want to hide/show hold lines. You can do this on
notation staves and tablature.
2.
In the Properties panel, activate/deactivate Show hold in the Guitar Bends group.
RESULT
Hold lines are shown on the selected bends on tablature when Show hold is activated, and
hidden when it is deactivated.
Guitar bends
Hiding/Showing guitar bend hold lines
775
Dorico Elements 3.5.12