User manual

2. In the Properties panel, activate/deactivate Bracket until end of tie chain in the Bracketed
Noteheads group.
RESULT
Brackets appear at the start and end of the selected tie chains when Bracket until end of tie
chain is activated, and only around the rst note/chord when it is deactivated.
If you activated Bracket until end of tie chain for a single note in a bracketed chord, the bracket
on the rst chord is not split but an additional bracket appears at the end of the tie chain for
the selected note only. If you deactivated
Bracket until end of tie chain for a single note in a
bracketed chord whose other notes are bracketed to the end of the tie chain, the bracket at the
end of the tie chain is split.
If you selected notes on tablature, the automatic brackets shown around the second note/chord
and all subsequent notes/chords in tie chains are updated to follow your property setting.
EXAMPLE
Brackets around only the rst chords in tie chains on
a notation staff
Brackets at the start and end of whole tie chains on a
notation staff
Brackets around only the rst chord in a tie chain,
with automatic brackets shown on the second chord
on tablature
Brackets around the start and end of the whole tie
chain on tablature
RELATED LINKS
Ties on page 938
Splitting brackets on chords
You can split brackets on any notehead within a chord. By default, Dorico Elements automatically
shows a single bracket for all notes in a chord unless it contains very large gaps, in which case
Dorico Elements automatically splits brackets.
PROCEDURE
1.
Select the individual notes in chords immediately above where you want to split brackets.
Notes
Bracketed noteheads
731
Dorico Elements 3.5.12