User manual

TIP
You can select individual layouts and set up their printing options without printing straight away.
Once you have set up the printing options you want for different layouts, you can then select all
the layouts you want to print and click Print. Your existing print settings are applied, even if your
selection contains layouts with different print settings.
For example, you can set your full score layout to print 3 booklet copies and the part layouts to
print
1 2-up copy each. You can then select all layouts to print them together and the previously
set values are followed.
PROCEDURE
1.
In the Layouts panel, select the layouts that you want to print.
NOTE
The layout selector in the toolbar is disabled in Print mode. If you want to see a different
layout in the print preview area, select it in the
Layouts panel.
2.
In the Print Options panel, enter the number of copies you want into the Copies eld in the
Destination section.
NOTE
The Copies eld appears blank when you have selected layouts with different values.
3. Activate/Deactivate Collate copies.
4. In the Destination section, choose Printer and select a printer from the menu.
5. In the Job Type section, select the page arrangement you want from the menu.
6. Optional: If you only want to print a specied range of pages, choose Page Range in the Job
Type section.
7. Optional: If you selected Page Range, enter the pages you want into the value eld.
● To specify a range, enter the rst page and last page separated with a dash, such as 1-4.
● To specify individual pages or separate ranges, enter each page/range separated with
commas, such as
1,3,5-8.
8. In the Page Setup section, select a paper size from the menu.
9. Choose the paper orientation you want.
10. Optional: If you selected Spreads or 2-up for the job type, activate/deactivate Print odd nal
page on to specify the paper size on which you want to print nal pages for layouts with odd
numbers of pages.
11.
Select a paper size and paper orientation for the odd nal page.
12.
Choose one of the following size options:
● Fit to Paper
● Custom Scale
13.
Optional: If you selected Custom Scale, enter the scale factor you want into the Scale factor
eld.
14.
In the Duplex Printing section, select one of the printing options from the Print on menu.
15.
Optional: If you selected a duplex printing option, use the bottom two menus to select how
the printed image is ipped when printing on the reverse side of the paper.
Print mode
Printing layouts
523
Dorico Elements 3.5.12