User manual

Table Of Contents
Cross-staff below
RESULT
The placement of the selected tuplet brackets is changed.
TIP
Deactivating Placement returns the selected tuplets to their default placement.
You can change the placement of all tuplet brackets relative to vocal staves project-wide in
the Placement section of the Tuplets page in Engrave > Engraving Options.
Changing the rhythmic end positions of tuplet brackets
You can change the rhythmic end positions of tuplet brackets relative to individual notes
individually.
PROCEDURE
1. Select the tuplet brackets whose end positions you want to change.
2. In the Properties panel, activate End position in the Tuplets group.
3. Choose one of the following options:
End at right-hand side of nal note
End immediately before following note
End at position of nal tuplet division
RESULT
The end position for the selected tuplet brackets is changed.
TIP
Deactivating the property returns the selected tuplets to your default settings.
You can change the horizontal position of tuplet numbers/ratios on all tuplets project-wide
in the Horizontal Position section of the Tuplets page in Engrave > Engraving Options.
RELATED LINKS
Changing the angles of tuplet brackets on page 759
Project-wide engraving options for tuplets on page 763
Tuplets
Tuplet brackets
760