User manual

Changing the players assigned to ows on page 99
Adding solo/section players
You can add both solo and section players to your project. Solo players can hold multiple
instruments, whereas section players can divide.
PREREQUISITE
The Players panel is open.
PROCEDURE
1. In the Players panel, add an empty-handed player in any of the following ways:
●
If you have started a new project, click Add Solo Player in the project start area.
●
If you have started a new project, click Add Section Player in the project start area.
● At the bottom of the Players panel, click Add Solo Player.
● At the bottom of the Players panel, click Add Section Player.
The instrument picker opens.
TIP
You can also open the instrument picker at any time by clicking the plus symbol in solo
player cards.
Alternatively, you can right-click a player and choose Add Instrument to Player.
2. Select an instrument in the instrument picker in any of the following ways:
● Start entering the instrument name you want, then select it from the ltered list.
●
Click an instrument family and then an instrument.
●
Press Up Arrow/Down Arrow to select an instrument family, then press Tab to
switch to the instrument column. Press Up Arrow/Down Arrow to select an
instrument.
TIP
●
An enclosure line shows which instrument family or instrument is selected
when using the keyboard to navigate.
●
Press Shift-Tab to switch back to the previous column in the instrument
picker.
3. Add the selected instrument in any of the following ways:
Setup mode
Players
74