User manual

● Outside slurs that start/end on a note or chord with an articulation, except if they can be
positioned within the staff.
● Inside the curvature of a slur if they t between the slur and the note or stem, to which
they belong, without colliding.
● Outside tuplet brackets.
Force and stress articulations outside the ends of the
slur
Duration articulations inside the ends of the slur
Changing the positions of articulations on tied notes
You can change where in tie chains articulations appear individually. By default, articulations of
force and stress are shown on the rst note/chord in tie chains, while articulations of duration
are shown on the last note/chord.
PROCEDURE
1. Select the tied notes/chords whose articulation position you want to change.
2. In the Articulations group of the Properties panel, activate Pos. in tie chain under the
corresponding heading for the articulation whose position you want to change.
For example, activate Pos. in tie chain under the Articulations of force heading to
change the position of accents.
3. Choose one of the following options:
● First note
● Last note
4. Optional: Repeat steps 2 and 3 to change the position of other types of articulations on the
selected tied notes/chords.
RESULT
The position of articulations in the selected tie chains is changed.
Changing the placement of articulations
You can change whether individual articulations are placed on the notehead side or stem side of
notes.
PROCEDURE
1. Select the notes/chords whose articulation placement you want to change.
2. In the Articulations group of the Properties panel, activate Placement under the
corresponding heading for the articulations whose placement you want to change.
For example, activate Placement under the Articulations of force heading to change the
placement of accents.
3. Select one of the following options from the menu:
●
Notehead side
●
Stem side
Articulations
Positions of articulations
377