User manual

Table Of Contents

Sets the plug-in to have the number of MIDI ports and channels specied in the Number

of MIDI ports and Number of MIDI channels elds.

4 Endpoint setup table

Contains the settings for the corresponding plug-in, arranged into the following columns:

● Port

Displays the port used by the instrument in the corresponding row of the table.

NOTE

You cannot change the port from within the Endpoint Setup dialog. You must

change the port in instrument track headers.

● Channel

Displays the channel used by the instrument in the corresponding row of the table.

NOTE

You cannot change the channel from within the Endpoint Setup dialog. You must

change the channel in instrument track headers.

● Assigned Instruments

Displays the name of the instrument in the corresponding row.

NOTE

This eld uses the underlying instrument name, meaning that any changes you

have made to the instrument name in the Edit Instrument Names dialog are not

shown.

● Expression map

Displays the expression map currently assigned to the instrument in the

corresponding row. You can change the expression map by double-clicking it and

selecting another expression map from the menu.

● Percussion map

Displays the percussion map currently assigned to the instrument in the

corresponding row. You can change the percussion map by double-clicking in the

eld and selecting another percussion map from the menu.

5 Number of audio outputs to show in Mixer

Allows you to change the number of audio outputs shown in the Mixer, for example, if you

want to hide unused outputs when using plug-ins that provide more audio outputs than

are used by Dorico Elements.